From: To: Subject: krnet Digest 4 Feb 2003 12:04:29 -0000 Issue 622 Date: Tuesday, February 04, 2003 4:05 AM krnet Digest 4 Feb 2003 12:04:29 -0000 Issue 622 Topics (messages 14871 through 14900): Re: RAM AIR 14871 by: Al Friesen Re: Sun N Fun 14872 by: virgnvs.juno.com 14873 by: Bdazzcamro.aol.com 14881 by: Rick Wilson 14885 by: Linda Warner 14891 by: Ron Thomas 14892 by: Rick Wilson William (Bill) Clapp - A THIEF in Georgia 14874 by: flykr.juno.com 14880 by: gleone Re: New engine torque at 1950 RPM 14875 by: Mac Wood 14899 by: Kenny Luter Fw:William (Bill) Clapp - A THIEF in Georgia 14876 by: flykr.juno.com 14877 by: Rick Wilson Fw:William (Bill) Clapp - A THIEF in Georgia - another victim 14878 by: flykr.juno.com 14882 by: Edwin Blocher 14884 by: Mark Jones 14887 by: Mark Jones vert. stabilizer strength 14879 by: Rick Wilson 14883 by: Mark Jones 14886 by: Mark Langford 14888 by: Rick Wilson 14890 by: Rick Wilson 14897 by: Donald Blankenship Re: William (Bill) Clapp 14889 by: Philip Maley Sun-N-Fun Website 14893 by: Frank Ross 14898 by: Dan Heath Carbon fiber skins? 14894 by: Justin Attack plane on PBS in the states. 14895 by: Sutstoy.aol.com Re: William (Bill) Clapp - A THIEF in Georgia: Net Mom! 14896 by: Donald Blankenship Re: A THIEF in Georgia: Net Mom!-please read. 14900 by: Dana Overall Administrivia: To subscribe to the digest, e-mail: To unsubscribe from the digest, e-mail: To post to the list, e-mail: ---------------------------------------------------------------------- Date: Mon, 3 Feb 2003 15:22:19 -0800 To: From: "Al Friesen" Subject: Re: KR> RAM AIR Message-ID: <001801c2cbdb$fc5b1860$275d7240@s8z8i0> All, I have fooled around with ram air system on a revmaster, revflow carb, found that the ram tube was too big and made it smaller with a beer can insert with fluted opening which I could adjust to get the right size hole and came to the conclusion that the hole size is about 1". I still have a problem with heat on takeoff but use a bit of carb heat to keep the temps down. Al ------------------------------ Date: Mon, 3 Feb 2003 17:33:02 -0500 To: bob@flyboybob.com From: virgnvs@juno.com Cc: krnet@mailinglists.org Subject: Re: KR> Sun N Fun Message-ID: <20030203.173311.-457681.1.virgnvs@juno.com> APRIL 5, Friday ,7:00 PM Same place Same time, Virg On Mon, 3 Feb 2003 14:16:58 -0500 "Bob" writes: > KRnetters, > > Does anyone know when the KR Dinner will be at this year's Sun N > Fun? I'm > trying to make plans to attend for a few days and I'd like to be > able to get > together with all the KR folks. > > Regards, > > Bob Lee > _____________________________ > KR2 N52BL Suwanee, GA USA > 91% done, 51% to go! > > > --------------------------------------------------------------------- > To post to the list, email: krnet@mailinglists.org , NOT "reply > all" > > To UNsubscribe, e-mail: krnet-unsubscribe@mailinglists.org > For additional commands, e-mail: krnet-help@mailinglists.org > > See the KRNet archives at http://www.maddyhome.com/krsrch/index.jsp > or http://www.bouyea.net/ for the Word files > > > Virgil N. Salisbury AMSOIL WWW.LUBEDEALER.COM/SALISBURY ------------------------------ Date: Mon, 3 Feb 2003 17:37:37 EST To: KRnet@mailinglists.org From: Bdazzcamro@aol.com Subject: Re: KR> Sun N Fun Message-ID: <196.151d4118.2b704931@aol.com> --part1_196.151d4118.2b704931_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit where is funNsun????? David Swanson --part1_196.151d4118.2b704931_boundary-- ------------------------------ Date: Mon, 3 Feb 2003 15:43:51 -0800 (PST) To: KRnet@mailinglists.org From: Rick Wilson Subject: Re: KR> Sun N Fun Message-ID: <20030203234351.32879.qmail@web21205.mail.yahoo.com> Sun-n-Fun is in Lakeland, Florida. I don't know the exact dates. March or April I believe. --- Bdazzcamro@aol.com wrote: > where is funNsun????? > > > > > David Swanson > __________________________________________________ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com ------------------------------ Date: Mon, 3 Feb 2003 19:46:16 -0500 (EST) To: krnet@mailinglists.org From: jaslkw@webtv.net (Linda Warner) Subject: Fwd: Re: KR> Sun N Fun Message-ID: <29679-3E3F0D58-1205@storefull-2176.public.lawson.webtv.net> --WebTV-Mail-13277-679 Content-Type: Text/Plain; Charset=US-ASCII Content-Transfer-Encoding: 7Bit Hi all. Sun-n-Fun is held this year from Wed. April 2 thru Tue April 8th. We are Co-Chairmen in Camper registration and will be there from the 26th of March on. Anyone needing any assistance or anything can find us out at the Camper Registration building on Drane Field Dr. Or call us on our cell phone # 239-821-4396. John Sickafoose Naples, Fl. Hugs etc. Linda Kay & John --WebTV-Mail-13277-679 Content-Disposition: Inline Content-Type: Message/RFC822 Content-Transfer-Encoding: 7Bit Received: from smtpinvite-2001-6.public.lawson.webtv.net (172.16.213.206) by storefull-2176.public.lawson.webtv.net with WTV-SMTP; Mon, 3 Feb 2003 15:44:01 -0800 (PST) Received: from mailinglists.org (server1.mailinglists.org [63.160.175.18]) by smtpinvite-2001-6.public.lawson.webtv.net (WebTV_Postfix+sws) with SMTP id 4F517FE21 for ; Mon, 3 Feb 2003 15:44:00 -0800 (PST) Received: (qmail 19658 invoked by alias); 3 Feb 2003 23:43:22 -0000 Mailing-List: contact krnet-help@mailinglists.org; run by ezmlm Precedence: bulk X-No-Archive: yes List-Post: List-Help: List-Unsubscribe: List-Subscribe: Reply-To: KRnet@mailinglists.org Delivered-To: mailing list krnet@mailinglists.org Received: (qmail 19649 invoked from network); 3 Feb 2003 23:43:22 -0000 Message-ID: <20030203234351.32879.qmail@web21205.mail.yahoo.com> Date: Mon, 3 Feb 2003 15:43:51 -0800 (PST) From: Rick Wilson To: KRnet@mailinglists.org In-Reply-To: <196.151d4118.2b704931@aol.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Subject: Re: KR> Sun N Fun Sun-n-Fun is in Lakeland, Florida. I don't know the exact dates. March or April I believe. --- Bdazzcamro@aol.com wrote: > where is funNsun????? > > > > > David Swanson > __________________________________________________ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com --------------------------------------------------------------------- To post to the list, email: krnet@mailinglists.org , NOT "reply all" To UNsubscribe, e-mail: krnet-unsubscribe@mailinglists.org For additional commands, e-mail: krnet-help@mailinglists.org See the KRNet archives at http://www.maddyhome.com/krsrch/index.jsp or http://www.bouyea.net/ for the Word files --WebTV-Mail-13277-679-- ------------------------------ Date: Mon, 3 Feb 2003 20:36:07 -0500 To: From: "Ron Thomas" Subject: Re: KR> Sun N Fun Message-ID: <009d01c2cbed$cb254420$c843a8c0@faaguy> I think the inquiy was tonge in cheek because it was said backwards. (fun'n'sun instead of Sun"N"Fun ----- Original Message ----- From: "Rick Wilson" To: Sent: Monday, February 03, 2003 6:43 PM Subject: Re: KR> Sun N Fun > Sun-n-Fun is in Lakeland, Florida. I don't know the > exact dates. March or April I believe. > --- Bdazzcamro@aol.com wrote: > > where is funNsun????? > > > > > > > > > > David Swanson > > > > > __________________________________________________ > Do you Yahoo!? > Yahoo! Mail Plus - Powerful. Affordable. Sign up now. > http://mailplus.yahoo.com > > --------------------------------------------------------------------- > To post to the list, email: krnet@mailinglists.org , NOT "reply all" > > To UNsubscribe, e-mail: krnet-unsubscribe@mailinglists.org > For additional commands, e-mail: krnet-help@mailinglists.org > > See the KRNet archives at http://www.maddyhome.com/krsrch/index.jsp > or http://www.bouyea.net/ for the Word files > ------------------------------ Date: Mon, 3 Feb 2003 18:41:12 -0800 (PST) To: KRnet@mailinglists.org, Ron Thomas From: Rick Wilson Subject: Re: KR> Sun N Fun Message-ID: <20030204024112.92378.qmail@web21210.mail.yahoo.com> I didn't notice that. I did find it a little funny that someone didn't know where Sun-n-Fun was. Rick Wilson. --- Ron Thomas wrote: > I think the inquiy was tonge in cheek because it was > said backwards. > (fun'n'sun instead of Sun"N"Fun > ----- Original Message ----- > From: "Rick Wilson" > To: > Sent: Monday, February 03, 2003 6:43 PM > Subject: Re: KR> Sun N Fun > > > > Sun-n-Fun is in Lakeland, Florida. I don't know > the > > exact dates. March or April I believe. > > --- Bdazzcamro@aol.com wrote: > > > where is funNsun????? > > > > > > > > > > > > > > > David Swanson > > > > > > > > > __________________________________________________ > > Do you Yahoo!? > > Yahoo! Mail Plus - Powerful. Affordable. Sign up > now. > > http://mailplus.yahoo.com > > > > > --------------------------------------------------------------------- > > To post to the list, email: krnet@mailinglists.org > , NOT "reply all" > > > > To UNsubscribe, e-mail: > krnet-unsubscribe@mailinglists.org > > For additional commands, e-mail: > krnet-help@mailinglists.org > > > > See the KRNet archives at > http://www.maddyhome.com/krsrch/index.jsp > > or http://www.bouyea.net/ for the Word files > > > > > --------------------------------------------------------------------- > To post to the list, email: krnet@mailinglists.org , > NOT "reply all" > > To UNsubscribe, e-mail: > krnet-unsubscribe@mailinglists.org > For additional commands, e-mail: > krnet-help@mailinglists.org > > See the KRNet archives at > http://www.maddyhome.com/krsrch/index.jsp > or http://www.bouyea.net/ for the Word files > __________________________________________________ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com ------------------------------ Date: Mon, 3 Feb 2003 22:54:46 GMT To: KRnet@mailinglists.org From: flykr@juno.com Cc: Subject: William (Bill) Clapp - A THIEF in Georgia Message-Id: <20030203.175501.461.182633@webmail4.nyc.untd.com> Hello KR flyers, Does anyone know Bill Clapp in SE Georgia, and can give me his contact information. He sold me some landing gear parts, but never shipped them to me. I sent him $ 1K for these parts, but he never shipped them. For a very long time, he kept lying to me promising to ship and coming up with many excuses for the delay, but he never shipped. Now his phone number that he gave me is not working. This guy sounds sweet and sincere on the phone, but he sure is a con artist and a thief. BE CAREFULL DEALING WITH BILL CLAPP IN GEORGIA, and if you know him…tell him he has no place stealing and cheating from members of this KR group. Safe flying, John ________________________________________________________________ Sign Up for Juno Platinum Internet Access Today Only $9.95 per month! Visit www.juno.com ------------------------------ Date: Mon, 03 Feb 2003 16:32:04 -0600 To: KRnet@mailinglists.org From: gleone Subject: Re: KR> William (Bill) Clapp - A THIEF in Georgia Message-ID: <3E3EEDE4.F5B77603@tritel.net> --------------DE04956B4E25751066E57446 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit If the transactions took place through the US Mail, contact the Postal Inspector and bring "mail fraud" charges against him. And, actually, he has no business stealing from ANYONE; not just the KR group. flykr@juno.com wrote: > Hello KR flyers, > > Does anyone know Bill Clapp in SE Georgia, and can give me his contact information. He sold me some landing gear parts, but never shipped them to me. I sent him $ 1K for these parts, but he never shipped them. For a very long time, he kept lying to me promising to ship and coming up with many excuses for the delay, but he never shipped. Now his phone number that he gave me is not working. This guy sounds sweet and sincere on the phone, but he sure is a con artist and a thief. > > BE CAREFULL DEALING WITH BILL CLAPP IN GEORGIA, and if you know him…tell him he has no place stealing and cheating from members of this KR group. > > Safe flying, John > > ________________________________________________________________ > Sign Up for Juno Platinum Internet Access Today > Only $9.95 per month! > Visit www.juno.com > > --------------------------------------------------------------------- > To post to the list, email: krnet@mailinglists.org , NOT "reply all" > > To UNsubscribe, e-mail: krnet-unsubscribe@mailinglists.org > For additional commands, e-mail: krnet-help@mailinglists.org > > See the KRNet archives at http://www.maddyhome.com/krsrch/index.jsp > or http://www.bouyea.net/ for the Word files --------------DE04956B4E25751066E57446-- ------------------------------ Date: Mon, 3 Feb 2003 23:01:32 -0000 To: From: "Mac Wood" Subject: Re: KR> New engine torque at 1950 RPM Message-ID: <002201c2cbd8$4a5d5400$758e403e@tinypc> We are maintaining a dignified silence - just hope the wheels stay on our tanks in the desert! Mac McConnell-Wood KR 2 (leaking oil all over the bedroom carpet) Hampshire, England, Great Brittain, UK ----- Original Message ----- From: "Bill Higdon" To: Sent: Monday, February 03, 2003 7:18 PM Subject: Re: KR> New engine torque at 1950 RPM > Frank, > You also for got why go English drink warm beer, Because Lucas Electric > Builds their refrigerators! I've owned 2 different British cars and > worked on bunches more. Maybe GM can help, but IIRC even Honda gave up > an the British auto industry. > Bill Higdon > Frank Dungan wrote: > > Sounds really good, up until the point that you said made in England. As one who has owned English made cars I have little faith in > > in their manufacturing abilities to produce or hold quality on a production basis. Maybe GM will force the quality issue. Ever hear the old joke: > > > > "Do you know why the British never really got in making computers... The could'nt figure out how to make them leak oil" > > > > Let the fire works begin... > > fd > > > > > > > > > >>>>ron@jrl-engineering.com 02/03/03 10:52AM >>> > >>> > > OPEL SPEEDSTER TURBO MAKES GENEVA DEBUT NEXT MONTH .... The new Opel Speedster Turbo will celebrate its world premiere at the Geneva International Motor Show, March 6-16, 2003. > > > > The mid-engine roadster is powered by a 147 kW (200 hp), 2.0- liter ECOTEC turbo engine that produces a maximum torque of 250 Newton meters from only 1950 rpm. > > > > It accelerates from zero to 100 in just 4.9 seconds. > > The open two-seater, with its stable aluminum chassis and reinforced fiberglass body, feels most at home on winding roads where it can take full advantage of its agile handling. Opel engineers have specially tuned the Speedster's proven motor sport suspension to match with the turbo version (power/weight ratio: 4.7 kg/hp). Aerodynamic characteristics have been optimized with front and rear spoilers. Special 17-inch alloy wheels, a modified front grill and a new interior underscore the Speedster Turbo's performance qualities. > > > > Like the Opel Speedster with a 2.2 ECOTEC engine (108 kW/147 hp), the new 200 hp-Turbo is manufactured by Lotus Cars in Hethel, England > > > > This engine will be avaiable on the new Saturn cars they are a GM lost foam all aluminum engine casting. Just think 200 hp [turbo] at 1950 rpm. > > Note: GM owns Opel. > > > > KRron > > > > -- > > Ronald R. Eason Sr. > > Pres. & CEO, KCMO Office > > J.R.L. Engineering Consortium Ltd. > > 816-468-4091, Kansas City, MO. > > Jim Eason V.P, 770-446-1291, Atlanta, Georgia > > Web Page: www.jrl-engineering.com > > > > > --------------------------------------------------------------------- > To post to the list, email: krnet@mailinglists.org , NOT "reply all" > > To UNsubscribe, e-mail: krnet-unsubscribe@mailinglists.org > For additional commands, e-mail: krnet-help@mailinglists.org > > See the KRNet archives at http://www.maddyhome.com/krsrch/index.jsp > or http://www.bouyea.net/ for the Word files > ------------------------------ Date: Tue, 4 Feb 2003 05:47:25 -0500 To: From: "Kenny Luter" Subject: Re: KR> New engine torque at 1950 RPM Message-ID: <002101c2cc3a$d491f560$b131bc3f@pavilion> Do you forget that on of the most prized airplanes of WW2 came from England Can you say spitfire MK 9 . I dont think I would pass on one of these . Kenny ----- Original Message ----- From: "Mac Wood" To: Sent: Monday, February 03, 2003 6:01 PM Subject: Re: KR> New engine torque at 1950 RPM > We are maintaining a dignified silence - just hope the wheels stay on our > tanks in the desert! Mac McConnell-Wood KR 2 > (leaking oil all over the bedroom carpet) Hampshire, England, Great > Brittain, UK > ----- Original Message ----- > From: "Bill Higdon" > To: > Sent: Monday, February 03, 2003 7:18 PM > Subject: Re: KR> New engine torque at 1950 RPM > > > > Frank, > > You also for got why go English drink warm beer, Because Lucas Electric > > Builds their refrigerators! I've owned 2 different British cars and > > worked on bunches more. Maybe GM can help, but IIRC even Honda gave up > > an the British auto industry. > > Bill Higdon > > Frank Dungan wrote: > > > Sounds really good, up until the point that you said made in England. As > one who has owned English made cars I have little faith in > > > in their manufacturing abilities to produce or hold quality on a > production basis. Maybe GM will force the quality issue. Ever hear the old > joke: > > > > > > "Do you know why the British never really got in making computers... > The could'nt figure out how to make them leak oil" > > > > > > Let the fire works begin... > > > fd > > > > > > > > > > > > > > >>>>ron@jrl-engineering.com 02/03/03 10:52AM >>> > > >>> > > > OPEL SPEEDSTER TURBO MAKES GENEVA DEBUT NEXT MONTH .... The new Opel > Speedster Turbo will celebrate its world premiere at the Geneva > International Motor Show, March 6-16, 2003. > > > > > > The mid-engine roadster is powered by a 147 kW (200 hp), 2.0- liter > ECOTEC turbo engine that produces a maximum torque of 250 Newton meters from > only 1950 rpm. > > > > > > It accelerates from zero to 100 in just 4.9 seconds. > > > The open two-seater, with its stable aluminum chassis and reinforced > fiberglass body, feels most at home on winding roads where it can take full > advantage of its agile handling. Opel engineers have specially tuned the > Speedster's proven motor sport suspension to match with the turbo version > (power/weight ratio: 4.7 kg/hp). Aerodynamic characteristics have been > optimized with front and rear spoilers. Special 17-inch alloy wheels, a > modified front grill and a new interior underscore the Speedster Turbo's > performance qualities. > > > > > > Like the Opel Speedster with a 2.2 ECOTEC engine (108 kW/147 hp), the > new 200 hp-Turbo is manufactured by Lotus Cars in Hethel, England > > > > > > This engine will be avaiable on the new Saturn cars they are a GM lost > foam all aluminum engine casting. Just think 200 hp [turbo] at 1950 rpm. > > > Note: GM owns Opel. > > > > > > KRron > > > > > > -- > > > Ronald R. Eason Sr. > > > Pres. & CEO, KCMO Office > > > J.R.L. Engineering Consortium Ltd. > > > 816-468-4091, Kansas City, MO. > > > Jim Eason V.P, 770-446-1291, Atlanta, Georgia > > > Web Page: www.jrl-engineering.com > > > > > > > > > > --------------------------------------------------------------------- > > To post to the list, email: krnet@mailinglists.org , NOT "reply all" > > > > To UNsubscribe, e-mail: krnet-unsubscribe@mailinglists.org > > For additional commands, e-mail: krnet-help@mailinglists.org > > > > See the KRNet archives at http://www.maddyhome.com/krsrch/index.jsp > > or http://www.bouyea.net/ for the Word files > > > > > --------------------------------------------------------------------- > To post to the list, email: krnet@mailinglists.org , NOT "reply all" > > To UNsubscribe, e-mail: krnet-unsubscribe@mailinglists.org > For additional commands, e-mail: krnet-help@mailinglists.org > > See the KRNet archives at http://www.maddyhome.com/krsrch/index.jsp > or http://www.bouyea.net/ for the Word files > ------------------------------ Date: Mon, 3 Feb 2003 23:10:58 GMT To: KRnet@mailinglists.org From: flykr@juno.com Cc: Subject: Fw:William (Bill) Clapp - A THIEF in Georgia Message-Id: <20030203.181108.461.182990@webmail4.nyc.untd.com> Looks like he has a bad history on this group. Look what I found in the archives ------------------------------ Date: Mon, 29 Jul 2002 23:12:07 +0800 To: "KRnet" From: "Phil Maley" Subject: The Bill Clapp affair Message-ID: Hi all A brief follow-up regarding my missing landing gear components. You might recall I mentioned I had sent some money over to Bill Clapp in Valdosta, Georgia for some landing gear components for my KR2. Well, despite him telling me via email that he had sent the goods by courier, he never did give me a tracking number. Since then he has stopped responding to my emails, his phone is disconnected and emails to him are bouncing. What a guy! Thank goodness you Americans are not all like him. I've registered a complaint with the internet fraud complaint centre http://www.ifccfbi.gov/ and sent a fax complaint to the district attorney's office in Valdosta. No help from either one so far, which I guess I should have expected. Our police in Australia say it's a civil matter so they won't help. Anyway, since Bill is registered on the FAA database as a current commercial pilot, he is bound to show up somewhere. If any of you run across him, just ask him if he remembers me. Also ask him how his KR2 is coming along. Remember the incredibly fast progress he was making in his occasional reports on the list? Who knows, maybe he is already in prison. Regards to all Phil Maley ________________________________________________________________ Sign Up for Juno Platinum Internet Access Today Only $9.95 per month! Visit www.juno.com ------------------------------ Date: Mon, 3 Feb 2003 15:15:05 -0800 (PST) To: KRnet@mailinglists.org From: Rick Wilson Subject: Re: KR> Fw:William (Bill) Clapp - A THIEF in Georgia Message-ID: <20030203231505.26893.qmail@web21205.mail.yahoo.com> If you will look harder in the archives you'll find some more people who have been taken by this same guy. Rick Wilson. --- flykr@juno.com wrote: > Looks like he has a bad history on this group. Look > what I found in the archives > > > ------------------------------ > > Date: Mon, 29 Jul 2002 23:12:07 +0800 > To: "KRnet" > From: "Phil Maley" > Subject: The Bill Clapp affair > Message-ID: > > > Hi all > > A brief follow-up regarding my missing landing gear > components. You > might recall I mentioned I had sent some money over > to Bill Clapp in > Valdosta, Georgia for some landing gear components > for my KR2. Well, > despite him telling me via email that he had sent > the goods by > courier, he never did give me a tracking number. > Since then he has > stopped responding to my emails, his phone is > disconnected and emails > to him are bouncing. What a guy! Thank goodness you > Americans are not > all like him. > > I've registered a complaint with the internet fraud > complaint centre > http://www.ifccfbi.gov/ and sent a fax complaint to > the district > attorney's office in Valdosta. No help from either > one so far, which I > guess I should have expected. Our police in > Australia say it's a civil > matter so they won't help. > > Anyway, since Bill is registered on the FAA database > as a current > commercial pilot, he is bound to show up somewhere. > If any of you run > across him, just ask him if he remembers me. Also > ask him how his KR2 > is coming along. Remember the incredibly fast > progress he was making > in his occasional reports on the list? > > Who knows, maybe he is already in prison. > > Regards to all > Phil Maley > > > > > > > > > > ________________________________________________________________ > Sign Up for Juno Platinum Internet Access Today > Only $9.95 per month! > Visit www.juno.com > > --------------------------------------------------------------------- > To post to the list, email: krnet@mailinglists.org , > NOT "reply all" > > To UNsubscribe, e-mail: > krnet-unsubscribe@mailinglists.org > For additional commands, e-mail: > krnet-help@mailinglists.org > > See the KRNet archives at > http://www.maddyhome.com/krsrch/index.jsp > or http://www.bouyea.net/ for the Word files > __________________________________________________ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com ------------------------------ Date: Mon, 3 Feb 2003 23:14:00 GMT To: KRnet@mailinglists.org From: flykr@juno.com Cc: Subject: Fw:William (Bill) Clapp - A THIEF in Georgia - another victim Message-Id: <20030203.181426.461.183054@webmail4.nyc.untd.com> here is another one i found, of a third guy Bill Clapp stole from ----------------------------------------------------------- ======================================================= -----Original Message----- From: smahaini [mailto:saad.mahaini@wcom.com] Sent: Thursday, January 09, 2003 10:17 AM To: krnet@mailinglists.org Subject: KR> Bill Clapp - Bounced Check Hello, Does anyone know how to get hold of Bill Clapp. He send me a check for an Icom A-21 handheld radio he bought from me, and the check bounced. He is not returning my emails nor my voice mail. Anyone else had similar problem with Bill? Any ideas Thanks, Saad ________________________________________________________________ Sign Up for Juno Platinum Internet Access Today Only $9.95 per month! Visit www.juno.com ------------------------------ Date: Mon, 3 Feb 2003 17:42:59 -0600 To: From: "Edwin Blocher" Subject: Re: KR> Fw:William (Bill) Clapp - A THIEF in Georgia - another victim Message-ID: <004801c2cbdd$fc4b4f00$0201a8c0@computer> When we were doing canopys with Todds Canopies I told Todd not to ship until the check cleared which he did, no problem. I communicated with him via e-mail, no problem. I just sent him an e-mail, undeliverable, problem. My next project is to find him. I'll do it too!! ED Ed Blocher Santa Rosa Beach, FL eblocher@earthlink.net ----- Original Message ----- From: To: Sent: Monday, February 03, 2003 5:14 PM Subject: KR> Fw:William (Bill) Clapp - A THIEF in Georgia - another victim > here is another one i found, of a third guy Bill Clapp stole from > > ----------------------------------------------------------- > > ======================================================= > > -----Original Message----- > From: smahaini [mailto:saad.mahaini@wcom.com] > Sent: Thursday, January 09, 2003 10:17 AM > To: krnet@mailinglists.org > Subject: KR> Bill Clapp - Bounced Check > > Hello, > > > > Does anyone know how to get hold of Bill Clapp. He send me a check for > an Icom A-21 handheld radio he bought from me, and the check bounced. > He is not returning my emails nor my voice mail. Anyone else had > similar problem with Bill? Any ideas > > > > Thanks, Saad > > > > > > > > ________________________________________________________________ > Sign Up for Juno Platinum Internet Access Today > Only $9.95 per month! > Visit www.juno.com > > --------------------------------------------------------------------- > To post to the list, email: krnet@mailinglists.org , NOT "reply all" > > To UNsubscribe, e-mail: krnet-unsubscribe@mailinglists.org > For additional commands, e-mail: krnet-help@mailinglists.org > > See the KRNet archives at http://www.maddyhome.com/krsrch/index.jsp > or http://www.bouyea.net/ for the Word files > > ------------------------------ Date: Mon, 3 Feb 2003 18:39:44 -0600 To: From: "Mark Jones" Subject: Re: KR> Fw:William (Bill) Clapp - A THIEF in Georgia - another victim Message-ID: <008e01c2cbe5$e9f6a540$cc561f41@wi.rr.com> Clapp, William B Jr and Joanne 2408 Battle Dr Villa Rica, GA 30180 770-214-1802 Mark Jones (N886MJ) Wales, WI USA E-mail me at flykr2s@wi.rr.com Visit my KR-2S CorvAIRCRAFT web site at http://mywebpage.netscape.com/n886mj/homepage.html ----- Original Message ----- From: "Edwin Blocher" To: Sent: Monday, February 03, 2003 5:42 PM Subject: Re: KR> Fw:William (Bill) Clapp - A THIEF in Georgia - another victim > When we were doing canopys with Todds Canopies I told Todd not to ship until > the check cleared which he did, no problem. I communicated with him via > e-mail, no problem. I just sent him an e-mail, undeliverable, problem. > My next project is to find him. I'll do it too!! > ED > Ed Blocher > Santa Rosa Beach, FL > eblocher@earthlink.net > ----- Original Message ----- > From: > To: > Sent: Monday, February 03, 2003 5:14 PM > Subject: KR> Fw:William (Bill) Clapp - A THIEF in Georgia - another victim > > > > here is another one i found, of a third guy Bill Clapp stole from > > > > ----------------------------------------------------------- > > > > ======================================================= > > > > -----Original Message----- > > From: smahaini [mailto:saad.mahaini@wcom.com] > > Sent: Thursday, January 09, 2003 10:17 AM > > To: krnet@mailinglists.org > > Subject: KR> Bill Clapp - Bounced Check > > > > Hello, > > > > > > > > Does anyone know how to get hold of Bill Clapp. He send me a check for > > an Icom A-21 handheld radio he bought from me, and the check bounced. > > He is not returning my emails nor my voice mail. Anyone else had > > similar problem with Bill? Any ideas > > > > > > > > Thanks, Saad > > > > > > > > > > > > > > > > ________________________________________________________________ > > Sign Up for Juno Platinum Internet Access Today > > Only $9.95 per month! > > Visit www.juno.com > > > > --------------------------------------------------------------------- > > To post to the list, email: krnet@mailinglists.org , NOT "reply all" > > > > To UNsubscribe, e-mail: krnet-unsubscribe@mailinglists.org > > For additional commands, e-mail: krnet-help@mailinglists.org > > > > See the KRNet archives at http://www.maddyhome.com/krsrch/index.jsp > > or http://www.bouyea.net/ for the Word files > > > > > > > > --------------------------------------------------------------------- > To post to the list, email: krnet@mailinglists.org , NOT "reply all" > > To UNsubscribe, e-mail: krnet-unsubscribe@mailinglists.org > For additional commands, e-mail: krnet-help@mailinglists.org > > See the KRNet archives at http://www.maddyhome.com/krsrch/index.jsp > or http://www.bouyea.net/ for the Word files > > ------------------------------ Date: Mon, 3 Feb 2003 18:51:11 -0600 To: From: "Mark Jones" Subject: Re: KR> Fw:William (Bill) Clapp - A THIEF in Georgia - another victim Message-ID: <00be01c2cbe7$835a1cc0$cc561f41@wi.rr.com> I should have mentioned this is from www.whitepages.com and they have no address for Bill Clapp in Valdosta, GA. Villa Rica is due west of Atlanta on I-20. May not be the right person. Mark Jones > Clapp, William B Jr and Joanne > 2408 Battle Dr > Villa Rica, GA 30180 > 770-214-1802 > > > > Mark Jones (N886MJ) > Wales, WI USA > E-mail me at flykr2s@wi.rr.com > Visit my KR-2S CorvAIRCRAFT web site at > http://mywebpage.netscape.com/n886mj/homepage.html > > > ----- Original Message ----- > From: "Edwin Blocher" > To: > Sent: Monday, February 03, 2003 5:42 PM > Subject: Re: KR> Fw:William (Bill) Clapp - A THIEF in Georgia - another > victim > > > > When we were doing canopys with Todds Canopies I told Todd not to ship > until > > the check cleared which he did, no problem. I communicated with him via > > e-mail, no problem. I just sent him an e-mail, undeliverable, problem. > > My next project is to find him. I'll do it too!! > > ED > > Ed Blocher > > Santa Rosa Beach, FL > > eblocher@earthlink.net > > ----- Original Message ----- > > From: > > To: > > Sent: Monday, February 03, 2003 5:14 PM > > Subject: KR> Fw:William (Bill) Clapp - A THIEF in Georgia - another victim > > > > > > > here is another one i found, of a third guy Bill Clapp stole from > > > > > > ----------------------------------------------------------- > > > > > > ======================================================= > > > > > > -----Original Message----- > > > From: smahaini [mailto:saad.mahaini@wcom.com] > > > Sent: Thursday, January 09, 2003 10:17 AM > > > To: krnet@mailinglists.org > > > Subject: KR> Bill Clapp - Bounced Check > > > > > > Hello, > > > > > > > > > > > > Does anyone know how to get hold of Bill Clapp. He send me a check for > > > an Icom A-21 handheld radio he bought from me, and the check bounced. > > > He is not returning my emails nor my voice mail. Anyone else had > > > similar problem with Bill? Any ideas > > > > > > > > > > > > Thanks, Saad > > > > > > > > > > > > > > > > > > > > > > > > ________________________________________________________________ > > > Sign Up for Juno Platinum Internet Access Today > > > Only $9.95 per month! > > > Visit www.juno.com > > > > > > --------------------------------------------------------------------- > > > To post to the list, email: krnet@mailinglists.org , NOT "reply all" > > > > > > To UNsubscribe, e-mail: krnet-unsubscribe@mailinglists.org > > > For additional commands, e-mail: krnet-help@mailinglists.org > > > > > > See the KRNet archives at http://www.maddyhome.com/krsrch/index.jsp > > > or http://www.bouyea.net/ for the Word files > > > > > > > > > > > > > > --------------------------------------------------------------------- > > To post to the list, email: krnet@mailinglists.org , NOT "reply all" > > > > To UNsubscribe, e-mail: krnet-unsubscribe@mailinglists.org > > For additional commands, e-mail: krnet-help@mailinglists.org > > > > See the KRNet archives at http://www.maddyhome.com/krsrch/index.jsp > > or http://www.bouyea.net/ for the Word files > > > > > > > > --------------------------------------------------------------------- > To post to the list, email: krnet@mailinglists.org , NOT "reply all" > > To UNsubscribe, e-mail: krnet-unsubscribe@mailinglists.org > For additional commands, e-mail: krnet-help@mailinglists.org > > See the KRNet archives at http://www.maddyhome.com/krsrch/index.jsp > or http://www.bouyea.net/ for the Word files > > ------------------------------ Date: Mon, 3 Feb 2003 15:31:42 -0800 (PST) To: krnet@mailinglists.org From: Rick Wilson Subject: vert. stabilizer strength Message-ID: <20030203233142.32647.qmail@web21201.mail.yahoo.com> Hi all, Can anyone tell me if the vertical stab is strong enough to support a KR2 while it is upside down, or is additional support necessary? Thanks, Rick Wilson. rwdw2002@yahoo.com __________________________________________________ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com ------------------------------ Date: Mon, 3 Feb 2003 18:34:07 -0600 To: From: "Mark Jones" Subject: Re: KR> vert. stabilizer strength Message-ID: <007701c2cbe5$209ffb60$cc561f41@wi.rr.com> I have seen a photo of Mark Langford's KR upside down and resting on the vertical stabilizer. Looked scary to me, but I am sure he will comment on this for us. I have mine upside down now but it is resting on the turtle deck just in front of the vertical and well cushioned and supported. Mark Jones (N886MJ) Wales, WI USA E-mail me at flykr2s@wi.rr.com Visit my KR-2S CorvAIRCRAFT web site at http://mywebpage.netscape.com/n886mj/homepage.html ----- Original Message ----- From: "Rick Wilson" To: Sent: Monday, February 03, 2003 5:31 PM Subject: KR> vert. stabilizer strength > Hi all, Can anyone tell me if the vertical stab is > strong enough to support a KR2 while it is upside > down, or is additional support necessary? Thanks, Rick > Wilson. rwdw2002@yahoo.com > > __________________________________________________ > Do you Yahoo!? > Yahoo! Mail Plus - Powerful. Affordable. Sign up now. > http://mailplus.yahoo.com > > --------------------------------------------------------------------- > To post to the list, email: krnet@mailinglists.org , NOT "reply all" > > To UNsubscribe, e-mail: krnet-unsubscribe@mailinglists.org > For additional commands, e-mail: krnet-help@mailinglists.org > > See the KRNet archives at http://www.maddyhome.com/krsrch/index.jsp > or http://www.bouyea.net/ for the Word files > ------------------------------ Date: Mon, 3 Feb 2003 18:53:25 -0600 To: From: "Mark Langford" Subject: Re: KR> vert. stabilizer strength Message-ID: <004201c2cbe7$d2e40d00$2402a8c0@800Athlon> Rick Wilson wrote: > Hi all, Can anyone tell me if the vertical stab is > strong enough to support a KR2 while it is upside > down, or is additional support necessary? Thanks, Rick Yep, I've had mine upside down sitting on the tail for probably a total of 3 months altogether, done on several separate occasions. Troy Petteway did the same. Eventually I developed a little ripple in very top of the leading edge (that's where all of the load was concentrated) and punched the plywood rib down just a tad, but the easy way around that is set it on a piece of 2 inch foam to distribute the load (Troy taught me that one). When I repaired the little ripple, I did it with carbon fiber, but you wouldn't want to carbon fiber your whole tail if your antenna is in there. I've recently made a little "tail cart" comprised of a piece of 2x8 about 12 inches long with four little rollers stuck to the underside. I duct taped the top of the vertical stab with a piece of 1/4" rubber on top, put a big pile of flox on the cart, and flipped the plane over on it to cure. I now have an easy way to wheel the thing around when it's upside down, combined with the "flip-o-matic". Oh, I just found a picture. It's at http://home.hiwaay.net/~langford/02111746m.jpg . Mark Langford, Huntsville, AL mailto:langford@hiwaay.net see KR2S project at http://home.hiwaay.net/~langford ------------------------------ Date: Mon, 3 Feb 2003 16:59:52 -0800 (PST) To: KRnet@mailinglists.org, Mark Langford From: Rick Wilson Subject: Re: KR> vert. stabilizer strength Message-ID: <20030204005952.30213.qmail@web21203.mail.yahoo.com> Thanks to both Marks, Langford and Jones for the information. I'm getting ready to do some bottom work and wanted to make sure the stab would stand it. Thanks again, Rick Wilson. --- Mark Langford wrote: > Rick Wilson wrote: > > > Hi all, Can anyone tell me if the vertical stab is > > strong enough to support a KR2 while it is upside > > down, or is additional support necessary? Thanks, > Rick > > Yep, I've had mine upside down sitting on the tail > for probably a total of 3 > months altogether, done on several separate > occasions. Troy Petteway did > the same. Eventually I developed a little ripple in > very top of the leading > edge (that's where all of the load was concentrated) > and punched the plywood > rib down just a tad, but the easy way around that is > set it on a piece of 2 > inch foam to distribute the load (Troy taught me > that one). When I repaired > the little ripple, I did it with carbon fiber, but > you wouldn't want to > carbon fiber your whole tail if your antenna is in > there. > > I've recently made a little "tail cart" comprised of > a piece of 2x8 about 12 > inches long with four little rollers stuck to the > underside. I duct taped > the top of the vertical stab with a piece of 1/4" > rubber on top, put a big > pile of flox on the cart, and flipped the plane over > on it to cure. I now > have an easy way to wheel the thing around when it's > upside down, combined > with the "flip-o-matic". Oh, I just found a > picture. It's at > http://home.hiwaay.net/~langford/02111746m.jpg . > > Mark Langford, Huntsville, AL > mailto:langford@hiwaay.net > see KR2S project at http://home.hiwaay.net/~langford > > > > --------------------------------------------------------------------- > To post to the list, email: krnet@mailinglists.org , > NOT "reply all" > > To UNsubscribe, e-mail: > krnet-unsubscribe@mailinglists.org > For additional commands, e-mail: > krnet-help@mailinglists.org > > See the KRNet archives at > http://www.maddyhome.com/krsrch/index.jsp > or http://www.bouyea.net/ for the Word files > __________________________________________________ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com ------------------------------ Date: Mon, 3 Feb 2003 17:04:00 -0800 (PST) To: KRnet@mailinglists.org From: Rick Wilson Subject: Re: KR> vert. stabilizer strength Message-ID: <20030204010400.66159.qmail@web21208.mail.yahoo.com> Thanks to both Marks, Langford and Jones, for the info. I am getting ready to do some work on the bottom side and wanted to be sure the stab would handle it. Thanks again, Rick Wilson. rwdw2002@yahoo.com --- Mark Jones wrote: > I have seen a photo of Mark Langford's KR upside > down and resting on the > vertical stabilizer. Looked scary to me, but I am > sure he will comment on > this for us. I have mine upside down now but it is > resting on the turtle > deck just in front of the vertical and well > cushioned and supported. > > Mark Jones (N886MJ) > Wales, WI USA > E-mail me at flykr2s@wi.rr.com > Visit my KR-2S CorvAIRCRAFT web site at > http://mywebpage.netscape.com/n886mj/homepage.html > > > ----- Original Message ----- > From: "Rick Wilson" > To: > Sent: Monday, February 03, 2003 5:31 PM > Subject: KR> vert. stabilizer strength > > > > Hi all, Can anyone tell me if the vertical stab is > > strong enough to support a KR2 while it is upside > > down, or is additional support necessary? Thanks, > Rick > > Wilson. rwdw2002@yahoo.com > > > > __________________________________________________ > > Do you Yahoo!? > > Yahoo! Mail Plus - Powerful. Affordable. Sign up > now. > > http://mailplus.yahoo.com > > > > > --------------------------------------------------------------------- > > To post to the list, email: krnet@mailinglists.org > , NOT "reply all" > > > > To UNsubscribe, e-mail: > krnet-unsubscribe@mailinglists.org > > For additional commands, e-mail: > krnet-help@mailinglists.org > > > > See the KRNet archives at > http://www.maddyhome.com/krsrch/index.jsp > > or http://www.bouyea.net/ for the Word files > > > > > > --------------------------------------------------------------------- > To post to the list, email: krnet@mailinglists.org , > NOT "reply all" > > To UNsubscribe, e-mail: > krnet-unsubscribe@mailinglists.org > For additional commands, e-mail: > krnet-help@mailinglists.org > > See the KRNet archives at > http://www.maddyhome.com/krsrch/index.jsp > or http://www.bouyea.net/ for the Word files > __________________________________________________ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com ------------------------------ Date: Tue, 04 Feb 2003 02:47:18 -0500 To: KRnet@mailinglists.org From: "Donald Blankenship" Subject: Re: KR> vert. stabilizer strength Message-ID: <20030204074718.19760.qmail@mail.com> I'm not going to second-guess these two on a bet, given that one is the kr Einstein and the other would be understated as the kr Mario Andretti of the past ten+ years. You figure out which is which. But for what it is worth, if us normal mortals put 2 oz on top of that tail post, it will a) almost always separate from the top of the fuselage at the epoxy joint, or b) break the tail post, padded or not. --dirt ----- Original Message ----- From: "Mark Langford" Date: Mon, 3 Feb 2003 18:53:25 -0600 To: Subject: Re: KR> vert. stabilizer strength > Rick Wilson wrote: > > > Hi all, Can anyone tell me if the vertical stab is > > strong enough to support a KR2 while it is upside > > down, or is additional support necessary? Thanks, Rick > > Yep, I've had mine upside down sitting on the tail for probably a total of 3 > months altogether, done on several separate occasions. Troy Petteway did > the same. Eventually I developed a little ripple in very top of the leading > edge (that's where all of the load was concentrated) and punched the plywood > rib down just a tad, but the easy way around that is set it on a piece of 2 > inch foam to distribute the load (Troy taught me that one). When I repaired > the little ripple, I did it with carbon fiber, but you wouldn't want to > carbon fiber your whole tail if your antenna is in there. > > I've recently made a little "tail cart" comprised of a piece of 2x8 about 12 > inches long with four little rollers stuck to the underside. I duct taped > the top of the vertical stab with a piece of 1/4" rubber on top, put a big > pile of flox on the cart, and flipped the plane over on it to cure. I now > have an easy way to wheel the thing around when it's upside down, combined > with the "flip-o-matic". Oh, I just found a picture. It's at > http://home.hiwaay.net/~langford/02111746m.jpg . > > Mark Langford, Huntsville, AL > mailto:langford@hiwaay.net > see KR2S project at http://home.hiwaay.net/~langford > > > > --------------------------------------------------------------------- > To post to the list, email: krnet@mailinglists.org , NOT "reply all" > > To UNsubscribe, e-mail: krnet-unsubscribe@mailinglists.org > For additional commands, e-mail: krnet-help@mailinglists.org > > See the KRNet archives at http://www.maddyhome.com/krsrch/index.jsp > or http://www.bouyea.net/ for the Word files > -- __________________________________________________________ Sign-up for your own FREE Personalized E-mail at Mail.com http://www.mail.com/?sr=signup ------------------------------ Date: Tue, 4 Feb 2003 09:03:17 +0800 To: From: "Philip Maley" Subject: RE: KR> William (Bill) Clapp Message-ID: Hi John When I was in contact with him his cell phone number was (229) 561 1495. Worth a try. Regards Phil Maley Perth, Australia -----Original Message----- From: flykr@juno.com [mailto:flykr@juno.com] Sent: Tuesday, February 04, 2003 6:55 AM To: KRnet@mailinglists.org Subject: KR> William (Bill) Clapp - A THIEF in Georgia Hello KR flyers, Does anyone know Bill Clapp in SE Georgia, and can give me his contact information. He sold me some landing gear parts, but never shipped them to me. I sent him $ 1K for these parts, but he never shipped them. For a very long time, he kept lying to me promising to ship and coming up with many excuses for the delay, but he never shipped. Now his phone number that he gave me is not working. This guy sounds sweet and sincere on the phone, but he sure is a con artist and a thief. BE CAREFULL DEALING WITH BILL CLAPP IN GEORGIA, and if you know him…tell him he has no place stealing and cheating from members of this KR group. Safe flying, John ------------------------------ Date: Mon, 3 Feb 2003 21:20:16 -0800 (PST) To: krnet@mailinglists.org From: Frank Ross Subject: Sun-N-Fun Website Message-ID: <20030204052016.63679.qmail@web40904.mail.yahoo.com> I think the guy just needed some information and was unclear about the name. All you could want to know and more at: http://www.sun-n-fun.org/content/ For those of you from the Far North (above Interstate 10), Lakeland Florida in early April is HOT and HUMID. You won't need a wool sweater and a campfire won't be nearly as popular as an air-conditioned trailer. The mosquitoes are not as bad as Oshkosh, but they will fight you for your beer. I think it is every bit as good as Oshkosh. Frank Ross in San Antonio, TX __________________________________________________ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com ------------------------------ Date: Tue, 4 Feb 2003 05:45:43 -0800 (Pacific Standard Time) To: From: "Dan Heath" Subject: Re: KR> Sun-N-Fun Website Message-Id: <3E3FC407.00002C.01220@dan> --------------Boundary-00=_78ESR942QL8000000000 Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Frank,=0D =0D Are you going to Sun-N-Fun?=0D =0D and=0D =0D Justin,=0D =0D If cost is not the issue, why were you getting your plywood skins from Ho= me Depot? Sometimes, I wonder if you don't post these things just to get everyone flaming! =0D =0D You are loosing credibility and thus the likelyhood that people will continue to respond to you.=0D =0D N64KR=0D =0D Daniel R. Heath - Columbia, SC=0D =0D DanRH@KR-Builder.org=0D =0D See you in Red Oak - 2003=0D =0D See our KR at http://KR-Builder.org - Click on the pic=0D See our EAA Chapter 242 at http://EAA242.org=0D =0D -------Original Message-------=0D =0D From: KRnet@mailinglists.org=0D Date: Monday, February 03, 2003 09:20:50 PM=0D To: krnet@mailinglists.org=0D Subject: KR> Sun-N-Fun Website=0D =0D I think the guy just needed some information and was=0D unclear about the name. All you could want to know and=0D more at:=0D http://www.sun-n-fun.org/content/=0D For those of you from the Far North (above Interstate=0D 10), Lakeland Florida in early April is HOT and HUMID.=0D You won't need a wool sweater and a campfire won't be=0D nearly as popular as an air-conditioned trailer. The=0D mosquitoes are not as bad as Oshkosh, but they will=0D fight you for your beer. =0D I think it is every bit as good as Oshkosh.=0D Frank Ross in San Antonio, TX =0D =0D __________________________________________________=0D Do you Yahoo!?=0D Yahoo! Mail Plus - Powerful. Affordable. Sign up now.=0D http://mailplus.yahoo.com=0D =0D ---------------------------------------------------------------------=0D To post to the list, email: krnet@mailinglists.org , NOT "reply all"=0D =0D To UNsubscribe, e-mail: krnet-unsubscribe@mailinglists.org =0D For additional commands, e-mail: krnet-help@mailinglists.org=0D =0D See the KRNet archives at http://www.maddyhome.com/krsrch/index.jsp=0D or http://www.bouyea.net/ for the Word files=0D =0D =2E=20 --------------Boundary-00=_78ESR942QL8000000000-- ------------------------------ Date: Mon, 03 Feb 2003 22:17:38 -0600 To: KRnet@mailinglists.org From: Justin Subject: Carbon fiber skins? Message-ID: <3E3F3EE2.1060302@socal.rr.com> I was to post some thoughts and any feedback would be great. I was thinking up of putting a layer of carbon fiber in place of plywood skin on the fuselage. Would it be strong or weaker? Lighter or heavyer? Cost is not the issue here but im sure it would be much better looking at less weight. I think it would be stronger then plywood but im no expert. Justin ------------------------------ Date: Tue, 4 Feb 2003 01:31:53 EST To: KRnet@mailinglists.org From: Sutstoy@aol.com Subject: Attack plane on PBS in the states. Message-ID: <1ab.1076a636.2b70b859@aol.com> --part1_1ab.1076a636.2b70b859_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit The compititon to see who build the next Strike Fighter/Attack plane that just concluded will be on the PBS program NOVA Tuesday night. It's a 2 hour program so check your local listings for time. Ought to be interesting. Aloha Joe :>}) --part1_1ab.1076a636.2b70b859_boundary-- ------------------------------ Date: Tue, 04 Feb 2003 02:18:28 -0500 To: KRnet@mailinglists.org From: "Donald Blankenship" Subject: Re: KR> William (Bill) Clapp - A THIEF in Georgia: Net Mom! Message-ID: <20030204071828.34591.qmail@mail.com> Oh, my gosh! Net mom! Net mom! A person has been taking advantage of the krnet and has been obviously ripping people off! Isn't there someone who is going to cry "Net Mom!" now that people have noticed and are publicly complaining? The guy I complained about is now hiding under his bed from the IRS (and I'll get him with the USPS and IL state tax). Where Are the two individuals that complain "Net mom" and stick up for these people and ask for generous cash contributions to be sent to the perpetrator? --Don Blankenship ----- Original Message ----- From: gleone Date: Mon, 03 Feb 2003 16:32:04 -0600 To: KRnet@mailinglists.org Subject: Re: KR> William (Bill) Clapp - A THIEF in Georgia > If the transactions took place through the US Mail, contact the Postal Inspector and bring "mail fraud" charges against him. And, actually, he has no business stealing from ANYONE; not just the KR group. > > flykr@juno.com wrote: > > > Hello KR flyers, > > > > Does anyone know Bill Clapp in SE Georgia, and can give me his contact information. He sold me some landing gear parts, but never shipped them to me. I sent him $ 1K for these parts, but he never shipped them. For a very long time, he kept lying to me promising to ship and coming up with many excuses for the delay, but he never shipped. Now his phone number that he gave me is not working. This guy sounds sweet and sincere on the phone, but he sure is a con artist and a thief. > > > > BE CAREFULL DEALING WITH BILL CLAPP IN GEORGIA, and if you know him…tell him he has no place stealing and cheating from members of this KR group. > > > > Safe flying, John > > > > ________________________________________________________________ > > Sign Up for Juno Platinum Internet Access Today > > Only $9.95 per month! > > Visit www.juno.com > > > > --------------------------------------------------------------------- > > To post to the list, email: krnet@mailinglists.org , NOT "reply all" > > > > To UNsubscribe, e-mail: krnet-unsubscribe@mailinglists.org > > For additional commands, e-mail: krnet-help@mailinglists.org > > > > See the KRNet archives at http://www.maddyhome.com/krsrch/index.jsp > > or http://www.bouyea.net/ for the Word files > > > --------------------------------------------------------------------- > To post to the list, email: krnet@mailinglists.org , NOT "reply all" > > To UNsubscribe, e-mail: krnet-unsubscribe@mailinglists.org > For additional commands, e-mail: krnet-help@mailinglists.org > > See the KRNet archives at http://www.maddyhome.com/krsrch/index.jsp or http://www.bouyea.net/ for the Word files -- __________________________________________________________ Sign-up for your own FREE Personalized E-mail at Mail.com http://www.mail.com/?sr=signup ------------------------------ Date: Tue, 04 Feb 2003 07:00:23 -0500 To: KRnet@mailinglists.org From: "Dana Overall" Subject: Re: KR> A THIEF in Georgia: Net Mom!-please read. Message-ID: The guy Mr. Blankenship (I use the term loosely) is referring to is Larry Capps. Mr. Blankenship accused Mr. Capps of fraud in his attempt to resurrect the KR Newsletter. For some reason, Blankenship saw asking for subscriptions up front was defrauding the people on the KRNet. Mr. Capps did not receive enough subscriptions to make the newsletter viable and returned all checks to individuals or upon their requests converted the monies against the the newsletter CD. It's time that a wolf in sheeps clothing be uncovered. Mr. Blankenship has a warped sense of judgement. Mr. Blankenship will say, "I never said his name, you did". He was referring to Larry Capps and inuendos carry the weight as direct verbage. Sorry for the rant gang, but this guy is way off base. Dana Overall Richmond, KY http://rvflying.tripod.com do not archive >From: "Donald Blankenship" > >Oh, my gosh! Net mom! Net mom! A person has been taking advantage of the >krnet and has been obviously ripping people off! Isn't there someone who is >going to cry "Net Mom!" now that people have noticed and are publicly >complaining? The guy I complained about is now hiding under his bed from >the IRS (and I'll get him with the USPS and IL state tax). Where Are the >two individuals that complain "Net mom" and stick up for these people and >ask for generous cash contributions to be sent to the perpetrator? > >--Don Blankenship > _________________________________________________________________ MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*. http://join.msn.com/?page=features/virus ------------------------------ End of krnet Digest ***********************************