Received: from [66.113.66.18] by bou2100 (ArGoSoft Mail Server Freeware, Version 1.70 (1.7.0.3)); Wed, 21 May 2003 12:06:42 -0700 Received: from localhost ([127.0.0.1] helo=lizard.esosoft.net) by lizard.esosoft.net with esmtp (Exim 3.36 #1) id 19IYol-0003Nm-08 for lists@bouyea.net; Wed, 21 May 2003 12:00:03 -0700 Content-Type: multipart/mixed; boundary="===============54136014631520757==" MIME-Version: 1.0 From: krnet-request@mylist.net Subject: KRnet Digest, Vol 42, Issue 1 To: krnet@mylist.net X-BeenThere: krnet@mylist.net X-Mailman-Version: 2.1b3 Precedence: list List-Id: KR builders and pilots List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: List-Help: Sender: krnet-bounces+lists=bouyea.net@mylist.net Errors-To: krnet-bounces+lists=bouyea.net@mylist.net Message-Id: Date: Wed, 21 May 2003 12:00:03 -0700 --===============54136014631520757== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Description: KRnet Digest, Vol 42, Issue 1 Send KRnet mailing list submissions to krnet@mylist.net To subscribe or unsubscribe via the World Wide Web, visit http://mylist.net/listinfo/krnet or, via email, send a message with subject or body 'help' to krnet-request@mylist.net You can reach the person managing the list at krnet-owner@mylist.net When replying, please edit your Subject line so it is more specific than "Re: Contents of KRnet digest..." --===============54136014631520757== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Description: Today's Topics (4 messages) Today's Topics: 1. Fw: Finished tank!! (Mark Jones) 2. Re: Red Oak 2003 (Edwin Blocher) 3. KR2 FOR SALE 4. For Sale:TXN 960 Nav/Com --===============54136014631520757== Content-Type: multipart/digest; boundary="===============67644057704163352==" MIME-Version: 1.0 --===============67644057704163352== Content-Type: message/rfc822 MIME-Version: 1.0 Date: Tue, 20 May 2003 17:16:58 -0500 From: "Mark Jones" To: "KR Net" Subject: KR>Fw: Finished tank!! Message-ID: <001a01c31f1d$87ed62e0$6401a8c0@wi.rr.com> Content-Type: text/plain; charset="iso-8859-1" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Precedence: list Message: 1 Here are the finished tanks from Dana. All that is left to be done is install the top panel and sending unit. Subject: Finished tank!! > OK, Mark here you go. > > This picture shows the tank with the top on, fuel line pickup and vent line > fitting installed along with quick drain. Doesn't look like much. > > http://rvflying.tripod.com/krtankfinish1.jpg > > This pic shows the inside vent line fitting and fuel line pickup elbow. > Notice on the elbow I used an RV trick and made a anti rotation bracket. > Without this, when you tighten the outside nut you tend to turn the elbow > thereby raising the aft portion of your pickup line off the bottom of the > tank. I've angled the elbow down so that you won't have such a pronounced > bend in your alum. pickup line. Proseal is messy as you can see but the > more the better. > > http://rvflying.tripod.com/krtankfinish2.jpg > > This pic shows the entire inside of the tank. In this you can see the vent > line positioning. The vent line is 1/4" alum. with a 37 degree flare for > the AN fitting. > > http://rvflying.tripod.com/krtankfinish3.jpg > > Even more: > > This pic shows the outside vent line and fuel pickup elbow. Here you can > see the vent line pointing down so all you have to do is run a straight 1/4" > line down through the wing for venting. In this one you can also see the > run of the vent line itself and it's position in the forward most outboard > corner of the tank. It is proseal to alleviate vibration. This is also a > good pic showing the baffles and their height 1" below the top of the tank. > > http://rvflying.tripod.com/krtankfinish4.jpg > > And what is a tank without a aviation quick drain? > > http://rvflying.tripod.com/krtankfinish5.jpg > > This is the 20" side, 5" front, 3" rear shot showing the wing profile and > how it will sit in your wing between the spars. The quick drain should come > very close to the bottom of your wing skin without extending into the > breeze. This also shows the 3" rear centered with the 5" front, much more > appropriate for the new airfoil than the RAF48. > > http://rvflying.tripod.com/krtankfinish6.jpg > > If you want to post this on the KRNet, feel free to do so. > > Dana Overall Mark Jones (N886MJ) Wales, WI USA E-mail me at flykr2s@wi.rr.com Visit my KR-2S CorvAIRCRAFT web site at http://mywebpage.netscape.com/n886mj/homepage.html --===============67644057704163352== Content-Type: message/rfc822 MIME-Version: 1.0 Date: Tue, 20 May 2003 17:40:42 -0500 From: "Edwin Blocher" To: "KR builders and pilots" Subject: Re: KR>Red Oak 2003 Message-ID: <013201c31f20$d8b28ae0$0201a8c0@computer> References: <000701c31a8a$1df43ae0$2402a8c0@800Athlon> Content-Type: text/plain; charset="iso-8859-1" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Precedence: list Message: 2 Mark, I have been trying to post a message about the gathering today. They don't seem to be going through. I posted them to krnet@mylist.net and didn't recieve them back. Also how do I e-mail you now? Reply off net. Thanks, ED Ed Blocher Santa Rosa Beach, FL eblocher@earthlink.net ----- Original Message ----- From: "Mark Langford" To: "KR builders and flyers" Sent: Wednesday, May 14, 2003 9:31 PM Subject: KR>Red Oak 2003 > It's been kinda quiet today, so let me throw this one out there. I've been > looking through the 2002 Gathering photos at > http://home.hiwaay.net/~langford/redoak2002/ , and I can't wait 'til Red Oak > 2003! I got my room a few months ago and they acted like they were > starting to fill up, so don't forget to get a room. And no matter what it > takes, BE THERE! Check this web page, and you'll see why! Details of the > hotels, etc, are located at http://www.krgathering.org/ . And to answer the > ubiquitous question, "nope, I don't think I'm gonna fly there in N56ML. > Maybe in Larry's Tripe if I'm lucky... > > See y'all there! > > Mark Langford, Huntsville, AL > N56ML "at" hiwaay.net > see KR2S project at http://home.hiwaay.net/~langford > > > > > _______________________________________________ > see KRnet list details at http://www.krnet.org/instructions.html > --===============67644057704163352== Content-Type: message/rfc822 MIME-Version: 1.0 Date: Wed, 21 May 2003 12:39:31 EDT From: KR2BLDR@aol.com To: krnet@mylist.net Subject: KR>KR2 FOR SALE Message-ID: <94.380262c0.2bfd05c3@aol.com> Content-Type: text/plain; charset="US-ASCII" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Precedence: list Message: 3 KR2 Project in Ca. For Sale: Boat stage, tail dragger with Dan diehl gear, all material to finish $6,500.00 invested make offer, many extras with photos available, E-mail me off the net or call (760) 252-5649 leave message. Sam --===============67644057704163352== Content-Type: message/rfc822 MIME-Version: 1.0 Date: Wed, 21 May 2003 12:44:05 EDT From: KR2BLDR@aol.com To: krnet@mylist.net Subject: KR>For Sale:TXN 960 Nav/Com Message-ID: <171.1ed9bce4.2bfd06d5@aol.com> Content-Type: text/plain; charset="US-ASCII" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Precedence: list Message: 4 Terra TXN 960 Nav/Com with ECDI 720 Ch. $1360.00 OBO, Brand new still in original box with manual, photos available, E-mail me off the net or call (760) 252-5649 leave message. Sam --===============67644057704163352==-- --===============54136014631520757== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Description: Digest Footer _______________________________________________ See KRnet list details at http://www.krnet.org/instructions.html --===============54136014631520757==--