Received: from [66.113.66.18] by bou2100 (ArGoSoft Mail Server Freeware, Version 1.70 (1.7.0.3)); Fri, 30 May 2003 04:34:20 -0700 Received: from localhost ([127.0.0.1] helo=lizard.esosoft.net) by lizard.esosoft.net with esmtp (Exim 3.36 #1) id 19Li0I-000AUg-01; Fri, 30 May 2003 04:24:58 -0700 Content-Type: multipart/mixed; boundary="===============6593130703348733==" MIME-Version: 1.0 From: krnet-request@mylist.net Subject: KRnet Digest, Vol 51, Issue 1 To: krnet@mylist.net X-BeenThere: krnet@mylist.net X-Mailman-Version: 2.1b3 Precedence: list List-Id: KR builders and pilots List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: List-Help: Sender: krnet-bounces@mylist.net Errors-To: krnet-bounces@mylist.net Message-Id: Date: Fri, 30 May 2003 04:24:58 -0700 --===============6593130703348733== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Description: KRnet Digest, Vol 51, Issue 1 Send KRnet mailing list submissions to krnet@mylist.net To subscribe or unsubscribe via the World Wide Web, visit http://mylist.net/listinfo/krnet or, via email, send a message with subject or body 'help' to krnet-request@mylist.net You can reach the person managing the list at krnet-owner@mylist.net When replying, please edit your Subject line so it is more specific than "Re: Contents of KRnet digest..." --===============6593130703348733== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Description: Today's Topics (19 messages) Today's Topics: 1. KR1 - first time builder? (Daren Cogdon) 2. test (Edwin Blocher) 3. Re: Dual stick (Mark Langford) 4. Re: KRNET????? (Dan Heath) 5. Re: KR1 - first time builder? (Dan Heath) 6. Coming thru loud and clear on a reply (Dan Heath) 7. Re: Re: KRNET????? (larry flesner) 8. vert. card compass (larry flesner) 9. Test (William Clapp) 10. Re: vert. card compass (William Clapp) 11. Re: Dual stick (Ron Eason) 12. The state of the list address...incredibly looooooong (Mark Langford) 13. [OT] aviation collectibles (Brian Kraut) 14. Aluminum Tanks (Mark Jones) 15. Kr Flaps (Timothy Bellville) 16. Re: vert. card compass 17. Re: vert. card compass (Dan Heath) 18. Re: vert. card compass - Questions. (Dan Heath) 19. Re: vert. card compass (Mark Jones) --===============6593130703348733== Content-Type: multipart/digest; boundary="===============41846405128949637==" MIME-Version: 1.0 --===============41846405128949637== Content-Type: message/rfc822 MIME-Version: 1.0 Date: Thu, 29 May 2003 21:23:55 +0000 From: "Daren Cogdon" To: krnet@mylist.net Subject: KR>KR1 - first time builder? Message-ID: Content-Type: text/plain; format=flowed MIME-Version: 1.0 Precedence: list Message: 1 Hi guys This may well have been a posting some time back, so I apologise if anything is repeated. I'm contemplating building a KR1 as a first project. Is this a good choice? Or should I start with something else? I really like the KR1 and would love to modify the tailplane (just a little) to resemble, say, a Messerschmitt 109 fighter. Would it take a lot of modification to get this, and would it still be "pilot-friendly"? Daz _________________________________________________________________ Use MSN Messenger to send music and pics to your friends http://www.msn.co.uk/messenger --===============41846405128949637== Content-Type: message/rfc822 MIME-Version: 1.0 Date: Thu, 29 May 2003 16:20:22 -0500 From: "Edwin Blocher" To: "KR builders and pilots" Subject: KR>test Message-ID: <002b01c32628$1d835740$0201a8c0@computer> Content-Type: multipart/alternative; boundary="----=_NextPart_000_0028_01C325FE.340E9E40" MIME-Version: 1.0 Precedence: list Message: 2 This is a multi-part message in MIME format. ------=_NextPart_000_0028_01C325FE.340E9E40 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable test again Ed Blocher Santa Rosa Beach, FL eblocher@earthlink.net ------=_NextPart_000_0028_01C325FE.340E9E40 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
test again
Ed Blocher
Santa Rosa Beach, = FL
eblocher@earthlink.net<= /DIV> ------=_NextPart_000_0028_01C325FE.340E9E40-- --===============41846405128949637== Content-Type: message/rfc822 MIME-Version: 1.0 Date: Thu, 29 May 2003 19:19:17 -0500 From: "Mark Langford" To: "KR builders and pilots" Subject: Re: KR>Dual stick Message-ID: <003a01c32641$1ba31c30$2402a8c0@800Athlon> References: Content-Type: text/plain; charset="iso-8859-1" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Precedence: list Message: 3 Steven Phillabaum wrote: > OK Mark, I have to decide what set up I'm going to use for > the dual stick. Your dual stick looks complicated but it > also looks like it will work perfect. Question is using > the plans built configuration for the rest of the hardware > will your stick retrofit? How can I get a drawing so to > build it. I don't see any reason why this wouldn't work just fine with the stock system. Just eliminate the extra junk at the top of the bracket that supports my flap torque tube (saving more weight and reducing building complexity). But rather than welding one tall bellcrank onto the aluminum clamp collar, weld on two short stubby ones (top and bottom) with hole spacing the same as the elevator bellcrank and I would think it would work just fine. I would think that the drawings located at http://home.hiwaay.net/~langford/kcontrol.html#update would be all you'd need to build it, at least that was my intention. Mark Langford, Huntsville, AL N56ML "at" hiwaay.net see KR2S project at http://home.hiwaay.net/~langford --===============41846405128949637== Content-Type: message/rfc822 MIME-Version: 1.0 Date: Thu, 29 May 2003 21:11:21 -0700 (Pacific Daylight Time) From: "Dan Heath" To: "krnet@mylist.net" Cc: "Mark Langford (E-mail)" Subject: KR>Re: KRNET????? Message-ID: <3ED6D9E9.000001.00684@dan> References: <001001c32634$10bde0a0$2402a8c0@800Athlon> Content-Type: Multipart/Alternative; boundary="------------Boundary-00=_XAMOQL80000000000000" MIME-Version: 1.0 Precedence: list Message: 4 --------------Boundary-00=_XAMOQL80000000000000 Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Mark,=0D =0D I am receiving most posts, just can't post anything.=0D =0D Well, today I worked on the last aileron balance and messed up the balanc= e arm, so now I have to build a new one tomorrow.=0D =0D One thing to mention is that you cannot drill through lead without using some cooling and lubricating agent like kerosene or cutting oil.=0D =0D How's that?=0D =0D What did you think of the square tube for most of the stick construction?= =0D =0D N64KR=0D =0D Daniel R. Heath - Columbia, SC=0D =0D DanRH@KR-Builder.org=0D =0D See you in Red Oak - 2003=0D =0D See our KR at http://KR-Builder.org - Click on the pic=0D See our EAA Chapter 242 at http://EAA242.org=0D =20 --------------Boundary-00=_XAMOQL80000000000000 Content-Type: Text/HTML; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Mark,
 
I am receiving most posts, just can't post anything.
 
Well, today I worked on the last aileron balance and messed up = the balance arm, so now I have to build a new one tomorrow.
 
One thing to mention is that you cannot drill through lead without u= sing some cooling and lubricating agent like kerosene or cutting oil.
 
How's that?
 
What did you think of the square tube for most of the stick construc= tion? 
 
N64KR
 
Daniel R. Heath - Columbia, S= C
 
DanRH@KR-Builder.org
 
See you in Red Oak - 2003
 
See our KR at http://KR-Builder.o= rg - Click on the pic
See our EAA Chapter 242 at http://EAA= 242.org
 
--------------Boundary-00=_XAMOQL80000000000000-- (Pacific Daylight Time) From: "Dan Heath" To: Subject: Re: KR>KR1 - first time builder? Message-ID: <3ED6DA4E.000003.00684@dan> References: Content-Type: Multipart/Alternative; boundary="------------Boundary-00=_QDMOG6G0000000000000" MIME-Version: 1.0 Precedence: list Message: 5 --------------Boundary-00=_QDMOG6G0000000000000 Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Daz,=0D =0D Go for it. I think you have a good opportunity for success with that. =0D =0D N64KR=0D =0D Daniel R. Heath - Columbia, SC=0D =0D DanRH@KR-Builder.org=0D =0D See you in Red Oak - 2003=0D =0D See our KR at http://KR-Builder.org - Click on the pic=0D See our EAA Chapter 242 at http://EAA242.org=0D =20 --------------Boundary-00=_QDMOG6G0000000000000 Content-Type: Text/HTML; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Daz,
 
Go for it.  I think you have a good opportunity for success wit= h that. 
 
N64KR
 
Daniel R. Heath - Columbia, S= C
 
DanRH@KR-Builder.org
 
See you in Red Oak - 2003
 
See our KR at http://KR-Builder.o= rg - Click on the pic
See our EAA Chapter 242 at http://EAA= 242.org
 
--------------Boundary-00=_QDMOG6G0000000000000--